3ware Controllers - SATA II PCI Express w/ RAID 6
3ware 9650SE-4LPML
3ware 9650SE-4LPML

High Performance PCI Express to Serial ATA II

  • 4-port
  • Low profile
  • PCI Express x4
  • Multi-lane connectors
  • 256MB DDR2 533 onboard memory
  • Supported RAID levels: 0, 1, 5, 10, Single Disk and JBOD
  • Multi-lane forward breakout cables included in kit
  Price: $395.00 Part #: 9650SE-4LPML
   

Features

3ware 9650SE Features

  • 8th-generation StorSwitch™ non-blocking switched architecture
    • On-board I/O RISC processor and RAID offload provides true hardware RAID
  • SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives
  • Bootable array support for greater fault tolerance of your OS
  • Variable stripe size for performance tuning by application
  • 64-bit LBA support (greater than 2TB volume)
  • ATA pass-through mode support
  • DDR2 533 memory with ECC protection
  • 32 pooled DMA channels
  • Complete configuration management suite
    • 3ware BIOS Manager 2 (3BM2) – easy to use BIOS configuration tool
    • 3ware Disk Manager 2 (3DM®2) – browser-based management tool
    • Command Line Interface (CLI) – scriptable configuration tool
  • SNMP support
  • SMTP support for email/pager notification
  • ATA/6 and Out of band (OOB) staggered drive spin-up support
  • Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN
  • Battery Backup Unit (BBU) support (excluding 2-port model)
  • Multiple logical unit sizes and RAID levels on one card
  • Multiple card support within a system for large storage requirements
  • Hot-swap and hot-spare support for data availability
  • Dynamic sector repair for robust data protection
  • S.M.A.R.T. disk drive monitoring for reliability
  • Emergency Flash Recovery protects against failed firmware upgrade
  • Drive activity LED support
  • Online Capacity Expansion and RAID Level Migration
  • Write journaling for improved performance and data protection against accidental drive removal
  • Drive insertion and removal notification
  • Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane)
  • Chassis Control Unit for enclosure management via I2C
  • RoHS compliant

Specifications

Operating System Support

  • Microsoft® Windows® 2003/XP/2000, Red Hat Linux, SuSE Linux, Fedora Linux, 2.4 Linux kernel, 2.6 Linux kernel, FreeBSD; 32/64-bit driver support for Windows, Linux and FreeBSD For complete OS listing, go to: www.lsi.com/channel/ChannelDownloads/

3ware 9650SE Specifications

  • Low profile form factor (2, 4, 8-port configurations)
  • Full-height form factor (12, 16, 24-port configurations)
  • PCI Express x1 (2-port), x4 (4- & 8-port), x8 (12-, 16-, & 24-port), PCI Express 1.1 compliant
  • Serial ATA 2.6 Specification support
  • BIOS PnP (plug and play) and BBS (BIOS boot specification) support
  • Operating Temperature
    • Without BBU: 0°C to 50°C
    • With BBU: 10°C to 40°C
  • Power Requirements: 18W maximum
  • Dimensions
    • 9650SE-2LP 7.30”L x 2.73”H (18.54cm L x 6.93cm H)
    • 9650SE-4LPML 7.30”L x 2.73”H (18.54cm L x 6.93cm H)
    • 9650SE-8LPML 7.30”L x 2.73”H (18.54cm L x 6.93cm H)
    • 9650SE-12ML 6.90”L x 4.57”H (17.53cm L x 11.61cm H)
    • 9650SE-16ML 6.90”L x 4.57”H (17.53cm L x 11.61cm H)
    • 9650SE-24M8 7.23"L x 4.19"H (18.37cm L x 10.66cm H)

Service and Support

Accessories

3ware BBU-MODULE-03

3ware BBU-MODULE-03

Battery Backup Unit for 3ware 9650SE/9550SX/9550SXU/9590SE SATA II HW RAID Controllers


Part #: BBU-MODULE-03
More Information
Add to cart

3ware BBU-MODULE-04

3ware BBU-MODULE-04

Battery Backup Unit for 3ware 9690SA/9650SE/9550SX/9550SXU/9590SE SATA II HW RAID Controllers with remote battery mounting kit


Part #: BBU-MODULE-04
More Information
Add to cart

CBL-SFF8087OCF-05M

CBL-SFF8087OCF-05M

Cable, 1 unit of .5 meter Multi-lane Internal (SFF-8087) Serial ATA breakout cable, forward

Connects the controller's SFF-8087 Multi-lane connector(s) to the hard drive's or backplane's discrete SATA connector(s)


Part #: CBL-SFF8087OCF-05M
More Information
Add to cart

CBL-SFF8087OCF-10M

CBL-SFF8087OCF-10M

Cable, 1 unit of 1 meter Multi-lane Internal (SFF-8087) Serial ATA breakout cable, forward

Connects the controller's SFF-8087 Multi-lane connector(s) to the hard drive's or backplane's discrete SATA connector(s)

 


Part #: CBL-SFF8087OCF-10M
More Information
Add to cart

CBL-SFF8087-05M

CBL-SFF8087-05M

Cable, 1 unit of .5 meter Multi-lane Internal (SFF-8087) SAS/SATA cable


Connects the controller's SFF-8087 Multi-lane connector(s) to the backplane's SFF-8087 Multi-lane connector(s)


Part #: CBL-SFF8087-05M
More Information
Add to cart

CBL-SFF8087IB-05M

CBL-SFF8087IB-05M

Cable, 1 unit of .5 meter Multi-lane (SFF-8087) to Multi-lane (SFF-8470) SAS/SATA converter cable

Connects the controller's SFF-8087 Multi-lane (ML) connector(s) to the backplane's SFF-8470 Multi-lane (MI) connector(s)


Part #: CBL-SFF8087IB-05M
More Information
Add to cart

Top ˆ