Online Store

Store Home >> 3ware Controllers >> 6Gb SAS 9750 RAID Controllers >> 3ware SAS 9750-4i KIT

3ware SAS 9750-4i KIT

3ware SAS 9750-4i KIT

The 4-port 3ware SAS 9750-4i, supports data transfer rates of up to 6Gb/s per port, brings new features and improved performance to cost-sensitive server applications using up to 127 SATA or SAS devices.

Cables included!

In the Box: 3ware SAS 9750-4i,  one Mini-SAS to Mini-SAS cable (CBL-SFF8087-06M), Low Profile L-bracket, Driver & Documentation CD

Part #: LSI00215

 

Enlarge Price: $439.00 Part #: LSI00215

Features

3ware SAS 9750-4i Kit Features

  • Four internal 6Gb/s SATA+SAS ports
  • One Mini-SAS internal connector (SFF-8087)
  • RAID levels 0, 1, 5, 6,10, 50 and Single Disk
  • LSISAS2108 6Gb/s RAID-on-Chip– 800MHz PowerPC®
  • 512MB 800MHz DDRII cache memory
  • Optional battery backup module with StorSave BBU
  • Support for up to 127 SATA or SAS physical devices
  • PCI Express 2.0 provides faster signaling for high- bandwidth applications
  • Support for 3Gb/s and 6Gb/s, SAS and SATA, HDDs and SSDs
  • StreamFusion+ improves multi-stream read and write performance

Specifications

Solution Provided Four-port internal SATA+SAS solution for high-density servers and workstations using up to 127 devices with the flexibility to use both SATA and SAS hard drives and solid state drives (SSDs)
Physical Dimensions Low profile (6.6” X 2.536”)
Connectors One Mini-SAS SFF-8087 internal connector
Device Support Up to 127 SATA and/or SAS devices
Host Bus Type x8 lane PCI Express 2.0 Compliant
Data Transfer Rates Up to 6Gb/s per port
I/O Processor/SAS Controller LSISAS2108 RAID-on-Chip (ROC)
Cache Memory 512MB 800MHz DDR II SDRAM
Key RAID Data Protection Features
  • RAID levels 0, 1, 5, 6,10, 50 and Single Disk
  • Rapid RAID Recovery
  • StreamFusion+
  • Online Capacity Expansion (OCE)
  • Online RAID Level Migration (RLM)
  • Auto resume after loss of system power during array rebuild or reconstruction
  • Single controller Multipathing
  • Load Balancing
  • Variable stripe size support
  • Fast initialization for quick array setup
  • Background Task Activity Policies
  • Multiple logical unit sizes and RAID levels on one card
  • Bootable array support for greater fault tolerance of
    your OS
  • SMTP support for email notification
  • SNMP support
  • Emergency Flash Recovery protects against failed
    firmware upgrade
  • Up to 32 active units support
  • Up to 32 drives per unit support
  • Support for greater than 2TB volumes
  • S.M.A.R.T support
  • Staggered drive spin-up support
  • Drive insertion and removal notification
  • Global Hot Spare
    – Automatic rebuild
  • Enclosure management for SES 2.0 via I2C or in-band signaling
  • Optional Battery Backup with StorSave BBU
Operating Temperature Maximum ambient: 60°C (44.5°C w/iBBU)
Operating Voltage +3.3V
Warranty 3 years, free advanced technical support, advanced replacement option
Regulatory Certifications EN55022, EN55024, EN60950, EN 61000-3-2, EN 61000-3-3; FCC Class A, Class B; UL1950; UL; CSA C22.2; VCCI; RRL for MIC;
BSMI; C-tick
RAID Management 3ware™ Disk Manager 2 (3DM™2)
Command Line Utility (CLI)
3ware BIOS Manager (3BM)
SNMP support
OS Support Extensive support includes Microsoft™ Windows Vista™, Windows 7™, Windows Server™ 2003/2008, Red Hat Linux™, SuSE Linux™, Fedora Core Linux™, FreeBSD™, and more.
Visit the LSI download center for the most complete list of supported operating systems: lsi.com/support
Ordering Information 3ware SAS 9750-4i Single Pack P/N: LSI00216; 3ware SAS 9750-4i Kit P/N: LSI00215

Accessories

MegaRAID LSIiBBU07 MegaRAID LSIiBBU07

The MegaRAID LSIiBBU07, used with the 8880EM2, 9750 Series, 9260 Series and 9280 Series protects the integrity of the cached data by providing backup power if there is a complete AC power failure or a brief power outage. RoHS-6

* Requires part LSI00260 when used with 9750 and 9280 16i4e/ 24i4e controllers.

In the Box: MegaRAID LSIiBBU07, installation guide

Part #: LSI00161

 


Remote Battery Kit for LSIiBBU06, and LSIiBBU07 Remote Battery Kit for LSIiBBU06, and LSIiBBU07

The MegaRAID remote battery kit option enables remote battery mounting of the LSIiBBU06, or LSIiBBU07 off of the RAID controller. Required for use of the BBU with 9750 and 9280 16i4e / 24i4e controllers. In addition, the optional accessory BBU-BRACKET-05 mount can be used with this kit for installing the BBU into an available PCI slot.

In the Box: 27"; remote cable, remote interposer board, screws, Quick Installation Guide

Part #: LSI00260

 


BBU-BRACKET-05 BBU-BRACKET-05

LSI BBU-BRACKET-05 is a remote mounting board that allows customers to remotely mount their battery backup or CacheVault Power Module (LSICVM01) in an adjacent server PCI slot.

* Requires Remote Mount Kit (LSI00260) when used with BBU06, BBU07, and BBU08 (9260-4i/8i only) modules

In the Box: BBU-BRACKET-05 with vented full height bracket installed, Quick Installation Guide, and vented LP bracket

Part #: LSI00291

 


CBL-SFF8087-05M CBL-SFF8087-05M
Cable, 1 unit of .5 meter Multi-lane Internal (SFF-8087) SAS/SATA cable


Connects the controller's SFF-8087 Multi-lane connector(s) to the backplane's SFF-8087 Multi-lane connector(s)

Part #: CBL-SFF8087-05M


CBL-SFF8087OCF-05M CBL-SFF8087OCF-05M
Cable, 1 unit of .5 meter Multi-lane Internal (SFF-8087) Serial ATA breakout cable, forward

Connects the controller's SFF-8087 Multi-lane connector(s) to the hard drive's or backplane's discrete SATA connector(s)

Part #: CBL-SFF8087OCF-05M


CBL-SFF8087OCF-06M CBL-SFF8087OCF-06M
Cable, 1 unit of .6 meter Multi-lane internal (SFF-8087) Serial ATA breakout cable, forward

Connects the controller's SFF-8087 Multi-lane connector(s) to the hard drive's or backplane's discrete SATA connector(s)

Part #: CBL-SFF8087OCF-06M


CBL-SFF8087OCF-10M CBL-SFF8087OCF-10M
Cable, 1 unit of 1 meter Multi-lane Internal (SFF-8087) Serial ATA breakout cable, forward

Connects the controller's SFF-8087 Multi-lane connector(s) to the hard drive's or backplane's discrete SATA connector(s)

Part #: CBL-SFF8087OCF-10M

 


CBL-SAS8087OCF-06M CBL-SAS8087OCF-06M
0.6 meter Multi-lane Internal (SFF-8087) SAS/SATA breakout cable, forward, 4x (SFF-8482) w/ pwr

Connects the controller’s SFF-8087 Multi-lane connector(s) to up to four individual SAS or SATA drives; includes individual drive power connectors

Part #: CBL-SAS8087OCF-06M


CBL-SFF8087IB-05M CBL-SFF8087IB-05M
Cable, 1 unit of .5 meter Multi-lane (SFF-8087) to Multi-lane (SFF-8470) SAS/SATA converter cable

Connects the controller's SFF-8087 Multi-lane (ML) connector(s) to the backplane's SFF-8470 Multi-lane (MI) connector(s)

Part #: CBL-SFF8087IB-05M


CBL-SFF8087IB-06M CBL-SFF8087IB-06M
Multi-lane Internal SFF-8087 to Multi-lane Internal SFF-8470 SAS/SATA Converter Cable, .6 meter

Connects the controller's SFF-8087 Multi-lane (ML) connector(s) to the backplane's SFF-8470 Multi-lane (MI) connector(s)

Part #: CBL-SFF8087IB-06M


CBL-SFF8087-SATASB-06M CBL-SFF8087-SATASB-06M
Cable, 0.6m Multi-lane Internal (SFF-8087) to SATA fanout with sideband, custom I2C for 3ware 9750 series

The CBL-SFF8087-SATASB-06M is a 0.6 meter internal Mini-SAS (SFF8087) to x4 SATA cable with sideband.  Ideal for connecting 3ware SATA+SAS RAID controllers to discrete connector backplanes.

Part #: LSI00259


CBL-SFF8087-SATASB-10M CBL-SFF8087-SATASB-10M
Cable, 1.0m Multi-lane Internal (SFF-8087) to SATA fanout with sideband, custom I2C for 3ware 9750 series

The CBL-SFF8087-SATASB-10M is a 1 meter internal Mini-SAS (SFF8087) to x4 SATA cable with sideband. Ideal for connecting 3ware SATA+SAS RAID controllers directly to discrete connector backplanes. 

Part#: LSI00258